In this final thesis a rough description of aluminium extrusion is made, the importance of temperature of both the raw material and the extruded profile for a good profile quality. The difficulty in controlling these temperatures are discussed and attempts to increase the control are described. The attempts are basically made by controlling the furnace that is heating the raw material. This is done in a manner that the raw material reaches its final temperature shortly before it is extruded. An IR-camera at the press can be used for profile temperature measurements.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

The following degree project deals with the production of an ICC-profile, this in the form ofproducing ICC-profiles for VTAB Backa. The company previously had their own profile butthey weren?t satisfied, so earlier this year they started using the TU standard profile, but theyalso wanted a complement to this in form of a profile created for solely their printing press.The separation settings used when creating the new profiles were based on information fromTU and their profile. Two basic profiles were created and then edited to obtain a better result.The test printings made with the edited profiles showed that the less adjustments that are made,the better. It was also discovered that the TU standard profile eliminates the highlight toneswhiles the new profiles are somewhat darker.

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.

The aim of this thesis is to examine how salesperson control can be exercised in a retail store environment. A case study has been performed on a Swedish fashion company emphasizing the relationship between the company?s upper level management and their retail store operations in order to describe, analyze and classify the prevailing management control mechanisms. The paper presents an agency theoretical approach to the relationship applying behavior- and outcome based control theory, performance measurement theory and incentives theory in order to give a comprehensive image of the control system. The main finding is that the company?s management control system as applied to the sales force in its retail stores can be categorized as mainly behavior-based despite several explicit outcome-based features..

Title: Co-operative, prevent or complement? - An essay on the relationships between control systems. Authors: Kim Eriksson and Victoria KarlssonPurpose: The essay aims to describe the relations between control systems and how they related to each other, based on an operationalization of the control systems. Research question: What are the control systems relations to each other? With regards whether control systems co-operative, prevents and/or complement each other.Theoretical framework: The essays theoretical framework is based on Malmi and Browns (2008) description of five different control systems and control mechanisms associated with each control system.   Research methodology: The method was based on three different data collection methods. These methods were observations, documentation, and semi-structured interviews.Conclusions: It is concluded that the control systems has comprehensive relations. Control systems have more, than one, relation to each other..

Title: Co-operative, prevent or complement? - An essay on the relationships between control systems. Authors: Kim Eriksson and Victoria KarlssonPurpose: The essay aims to describe the relations between control systems and how they related to each other, based on an operationalization of the control systems. Research question: What are the control systems relations to each other? With regards whether control systems co-operative, prevents and/or complement each other.Theoretical framework: The essays theoretical framework is based on Malmi and Browns (2008) description of five different control systems and control mechanisms associated with each control system.   Research methodology: The method was based on three different data collection methods. These methods were observations, documentation, and semi-structured interviews.Conclusions: It is concluded that the control systems has comprehensive relations. Control systems have more, than one, relation to each other..

Title: Co-operative, prevent or complement? - An essay on the relationships between control systems. Authors: Kim Eriksson and Victoria KarlssonPurpose: The essay aims to describe the relations between control systems and how they related to each other, based on an operationalization of the control systems. Research question: What are the control systems relations to each other? With regards whether control systems co-operative, prevents and/or complement each other.Theoretical framework: The essays theoretical framework is based on Malmi and Browns (2008) description of five different control systems and control mechanisms associated with each control system.   Research methodology: The method was based on three different data collection methods. These methods were observations, documentation, and semi-structured interviews.Conclusions: It is concluded that the control systems has comprehensive relations. Control systems have more, than one, relation to each other..

Aims The aim of this study was to investigate how personnel within food control are regarded from different perspectives and to find the answers to the sub questions:- what is included in the profession of food control?- what are the requirements for personnel within the profession of food control?- how is the profession perceived from different perspectives?- how do personnel within the profession of food control estimate their psycho social working conditions?Method The study included 68 individuals (34 female and 34 male) and was conducted via observations, web-based surveys and survey-based interviews. Conclusion - The study was feasible.- The overall goal of the study as well as the research questions were answered to and contributed to clarify what is included in the profession of food control. - Quality measures should be implemented to greater extent within the development of the national food control system..

The objective of the present study was to evaluate distillers? dried grains with solubles (DDGS) as a protein source to rainbow trout (Oncorhynchus mykiss), by studying digestibility and growth measurements. One control diet, totally lacking DDGS, and three test diets were made containing 10 % (low), 31% (medium) and 51 % (high) DDGS respectively on dry matter (DM) basis. The control diet and the test diets were made to be as nutritionally equal as possible. Wheat bran was used to balance the fiber content of the diets.

Abstract The aim of this paper is to investigate whether Vara municipality has a continuous picture of their identity, profile and image. Globalization has contributed to the increasingly growing of place marketing. Therefore, the study goes on to using the concepts of identity, profile and image to find out if Vara Municipality communicates similar throughout the whole organization and find out their all through core values. Globalisation will be an interpretive framework for the work that describes why the place marketing is becoming more pressing. The sense of place will be a central part of this study as it is the feelings and images of different places that will be described by the municipality together with the identity, profile and image.

Abstract The aim of this paper is to investigate whether Vara municipality has a continuous picture of their identity, profile and image. Globalization has contributed to the increasingly growing of place marketing. Therefore, the study goes on to using the concepts of identity, profile and image to find out if Vara Municipality communicates similar throughout the whole organization and find out their all through core values. Globalisation will be an interpretive framework for the work that describes why the place marketing is becoming more pressing. The sense of place will be a central part of this study as it is the feelings and images of different places that will be described by the municipality together with the identity, profile and image.

This degree project has been done in parallel to the advertising agency Hera in Uppsala, and containsthe creating of a logotype and graphic profile for Aircall, a new big chain of shops dealing with telecommunication.Aircall was found 1 February 2004, when three smaller companies became one. Thisnew company were in need of a common brand and a uniform profile. The created graphic profile hasbeen applied to visiting cards, letterhead, envelopes, letter cards, bags, cars and advertisement. Thegraphic profile has also been used when designing the shop interior end exterior. Research has beendone on competitors graphic profiles and advertisement.

Stroke is caused by a bleeding or infarct in the brain and is one of the most common diseases in Sweden today. The purpose of the study was to evaluate if Ronnie Gardiner?s Rhythm Therapy (RGR-therapy) has any effect, regarding motor control and the subjective experienced health related quality of life, on people who have been affected by stroke. The examination group consisted of eight people. The intervention consisted of RGR-therapy once a week during a period of nine weeks.

The project Karin Park is an identity investigative project, to createa new interesting graphic profile for the ar tist Karin Park. Her newsound has taken her to a new kind of genre, where some standardsexists. The project creates a unique identity with logotype, ar tworkand package design. The graphic profile is created able to be appliedin different contexts..